12V Electric Windshield Wiper Kit for Most UTVs

I like it but wish that it had an auto-park function when I turn it off. As it is, I have to time the power off to keep it from stopping in the middle of the windscreen. Its not too difficult, but it is a distraction. Like any distraction, it could present a hazard during operation. But the motor is strong and has a wide sweep field. Overall, a pretty good product.

works pretty good and has a strong sweep, but it doesn't appear to have a parking point that it returns to when turned off. Nothing in the install documents that I have seen. But it seems to be easy to catch at a good position when I turn it off.

Not installed yet

Didn't fit holes in my machine

The wiper add on is a great feature to install, however I have yet had the time to put on my ZForce 950 Sport. I did get the kit out the box & checked the operation to make sure it works correctly & the length of the blade is perfect for the soze of the windshield. From what I can tell the blade soze could be changed to a longer or shorter if need be. I look forward to installing it over the next couple weekends.

Why you don’t send the power cable for the motor is puzzling to me

Although the washer jet nozzles are lame, the rest of the washer tank kit works good.

Perfect world as it should

I bought this washer setup for my 1025r jd tractor and I was very surprised to see the power of this pump and the easy installation of this product I have a Curtis cab on my tractor and had to drill two holes in the engine hood very satisfied I did not think it would work as well as it does great product for the money spend

Love love love

Pop and swap. Wired it up and fired it up. Thank you! I used a rivet nut and the hardware the kit came with.

Works great

Like all Kemimoto this works great! Perfect for those dusty days on the trails

Comes with everything you need, fits great in my old truck

Great aftermarket windshield washer setup. Easy to wire and easy to use.

Todo muy bien funciona muy bien

Mounted into rzr pro xp4 2021. Works great for little money. Mounted sprayers on angled part of factory hood, cut hole where factory accessory one goes and Mounted to the sloped backside of frame with a fender washer. Used this wiring harness to hook it up with a 2012 subaru forester rear wiper motor i snagged out of a parts car i had. Works great.OZ-USA Windshield Wiper/Washer On/Off/On Power Bus Bar Plug Wire Harness Kit Compatible with Polaris Pulse Power Busbar RZR Pro Ranger Crew XP Trail S 2018-2023

Fits under the hood of an rzr 800 well. Great addition for my rig. Easy to install easy to use. Has great pressure

Was slot smaller than expected

I love the windshield however the windshield wiper doesn’t cover the whole windshield but other than that it works perfect I will recommend to anybody

works and easy install

very nice and easy

Worked great everything u need. Holds about quart n a half

Bought in Sept 2025, for a John Deere UTV, as dealer wanted foolish money & tank was positioned outside the cab & engine bay, with JD's design. Decided to mount the washer nozzle above the wiper, even though the blade parks itself at top of windshield. Haven't had much call for it yet but like to have it available. Remember to use All Season wash that doesn't freeze, if you store yours outside.Yes this doesn't have the fit & finish of an engineer's design, the washer tube can be seen in my cab but works. Decided to cut a hole in the front compartment tray & put tank there. All works well

Had to tun a different tank when running a primer bumper and this little guy is super easy to set up on a 2011 Silverado, looks small but doesn’t use wiper fluid as fast as you would think.

Fit right into my heavily modded 04 WRX/Sti Didn’t need wiring or hoses. OEM connector was same as new pump. Now I can change my spark plugs without removing large washer tank.

It works great just what I expedited.

Used to make a backup camera wash system, had to add a small check valve so it didn’t all run out when not in use. Works as it should

Works well and the size is perfect. Doesn’t leak and is durable

Would totally buy again. Wired up to a 79 c10 and during the test shot clear over the roof of the car. For the price really impressed.

These are universal kits. The reservoir holds less than a gallon. That being said, Ive mounted these up in the back of a couple drift cars to use as a tire sprayer setup and they work great! Nothing fancy, just run a couple wires and the hose and it's good to go

so far so good, see how long it last

I good product

This was great and was super easy to install

Worked perfect for making a squirrel gun on the front of my car.

Good delivery.Good product.

Worked great for a Jeep XJ with a snorkel. The original wont fit after snorkel install so something smaller is needed. The one installed by the last owner started leaking so I took a chance and this looked like the last and worked well for the space and retrofitted holder that was made.

Arrived quickly. Works great in my side by side

Worked well with my 07 Silverado Lt 1500. Just spliced the wires with the OEM wires. Now my oversized tires dont rub.

Nice product easy to install

Completely drains if the nozzle is lower than the reservoir, will siphon itself empty. Was able to add a inline solenoid to keep it from draining

Make a bracket, rip apart your wiring loom, reroute the original wiring, and you’re ready for bugs on the windows.Lots of pressure, so much so that it squirts OVER the roof!I’m very impressed and do heartily recommend.

Works

Works as it should!

Perfect size for my custom application, easy to install and works great

Great quality, easy to install. My 2005 Impreza was missing it's washer fluid tank so I added two of these for the front and rear. Strong flowing pump and was able to use the factory wiring plugs conveniently.Cannot comment on the wiring or installation kit

Seems to work great would be nice if it didn't bleed out if you have to mount it up a little higher overall great product though

This worked as it should. Easy to install but the capacity of the reservoir is a little less than I hoped.

I bought this reservoir because I had to install a smaller one due to the purchase of a new bumper on my 2015 Subaru Crosstrek. The size of the reservoir is sufficient to hold a fairly large amount of fluid while fitting in tight engine compartments. It comes with a bracket to attach the reservoir to a flat surface. I had to fabricate a small hanger to use it in the location I needed but that was quick and easy. Secondly, it comes with a pump that is recessed into the reservoir. I actually removed the pump that came with it and replaced it with the one from my old reservoir so the wiring connector would fit. I also drilled and added a second pump for the rear window pump as well as drilling a hole in the bottom of the reservoir to install the factory low fluid switch so I did have an annoying lights on the dash. All in all I would highly recommend this reservoir because it is very well made and fully functional.

Installed on a Polaris ranger and it works great! Test the sprayers out before mounting because they have some pressure to them .

I liked that the bottle and mount fit and were easy to install. I found the momentary switch to be cheap and it failed as I had to make a solder connection. The kit did not come with the appropriate wire connectors for the switch. The wiring for the pump is way too short and wire must be added for many applications. The kit comes with two spray nozzles but does not have a tee for the hose to connect to both nozzles.

Easy to put on. But I recommend getting the one with the wipers too.

got a hell of a sprayer!! works fine!

Push button could be better quality or i would have given a 5.

So I bought this kemi moto washer fluid kit about a year ago. It seams high quality and has all the parts. I just haven’t put it in yet. I want to at some point. The switch that comes with it looks cheap I think I’m going to get an actual rocker switch or whatever they’re called.I got some kemi moto mirrors a while back and they worked great!… until I pressure washed them and broke the dumb things. Idk if I put um on wrong or what but there junk now. I got some cheapo china mirrors of eBay but I forgot to put um on and installed my windshield and the mirrors have to go on under it… oh well maybe I’ll install them when I install the washer fluid kit.

Wouldn’t fit on Yamaha RMAX not enough room for it under the hood

I used 2 of these in my offroad jeeps that I had to remove the washer bottle for snorkel install. These worked out great. Came with everything to install them including a button but I wired them into my factory harness. Recommend highly.

I installed it it work fine

Came as advertised, installed quickly , I wish it had more wiper travel & the connector to hook the supply leads to

Works great for my jeep

I installed this in my Polaris General as part of getting my SxS street legal. Only good spot to mount this unit was on the firewall on the passenger side of the machine near center console. The unit has good spray pressure and works well spraying light mud and dirt off the windshield. I struggled with ideal jet locations, but settled on putting the spray jets on the hood cowling. The unit works great and installation was easy aside from determining the best location for everything. THIS UNIT DOES NOT INCLUDE ADEQUATE WIRING/WIRE HARNESS FOR COMPLETE INSTALLATION, YOU WILL ALSO NEED TO WIRE IN A FUSE if you are doing a new install.

The article has a very powerful motor and the other components are of high quality.

Great quality ,Easy to install on my Polaris RZR. Only issue is the switch is cheap and did not last long.

Motor to weak to move blade

Perfect for any vehicle in need of a washer pump

The washer bottle mounting bracket was plastic. I was expecting something metal. The hose was way short, but it was an easy fix. Overall the whole thing was decent and came with all the hardware to mount.

Was worried the factory mount wouldn’t hold up to the abuse on the trails on my 2023 Can-Am Maverick X3 turbo rr but it’s held up the last few rides!

The sweep is only 90° could be biggerWiper blade came damaged. It’s just a j hook 16” blade so no big deal. Overall could be better but for a $50 kit it’s what you’d expect

Complete replacement

Put it in my 2023 Polaris Ranger XP 1000 wasn't really that hard to put in the jet nozzles really squirt well hopefully it lasts I've gotten almost a year out of it now thanks

Just put these wipers on my CF Moto they work great!

It looks fine, but I haven't tried it yet.

It was perfect for my UTV haven't had a chance to use it yet . Once the weather gets warmer we will be riding again. I recommend to purchase

Works great great company

Side by side

Great queality and good water presureInstal in a 1st gen tacoma

Works well for DIY halloween props

The sweep angle shall be increase from 90 degrees actual to 110, for an better surface coverage. Also nowhere in the incude instruction, we find the value of the required fuse. After a quick calculation of my old teck courses, I figured out a range of 10 -15amps.Denis Beaulieu Pohénégamook Qc. Canada

worked great for my side by side have bought a lot of Kemimoto products

This wiper kit is my second one. I had ordered one prior and worked out great! This time, no mounting hardware with it. Package that the motor came in was all torn up and open. Very poor packaging!! Don't know if it even will work! Have to get hardware from local store.

The reservoir is smaller in size but that is exactly what I was looking for. It'll make it a lot easier to find a home for it under the hood.

I have a 07-13 sierra 1500 body style truck with 35” tires. The original windshield washer reservoir was in the way and made the tires rub. Removed the old and installed this, does well. As you can see I did a little modifications to it. Spray paint flat black. Used some masking tape to area I didn’t want paint on. Turned out ok.Only compliant was I wish they had a small hose clamp that came with the kit. It did leak a little for me without using anything. Ended up using a zip tip for now, which surprisingly works but I plan on getting an actual hose clamp shortly to replace it.

very easy to set up easy to make it the way you like it

Great item at a great price works perfectly a great accessory for utv's

Should have the other wire connector and a template to put on the windshield to find the best place to put it.

Works well.. drill template would be helpful.Motor speeds don't match, so have to shut one off, then reverse cycle.

I purchased this to install on a tractor cab for an old 4010 john deere tractor. Implement dealers were wanting anywhere from $450-$600 for a winshield wiper and I figured I would give this product a shot first. The product itself is very simple, which is exactly what I wanted. It's a very straightforward mounting and wiring procedure. I haven't used it in a rain or snow storm yet and I honest do NOT expect the wiper blade to be very good but honestly I am extremely happy with this purchase.

wanted one that 180 degrees but can't fine it

Works well on my 2021 Can-Am Commander. Have to do some trimming to get it to fit well but works good otherwise. Have had it in for a year now with no issues.

Motor has short swipe drive, will clean a small spot to see out your windshield. Definitely recommend using a longer wiper blade if you can. Wiper arm is cheap and flimsy. Bent on the 2nd swipe across my Can Am glass windshield. Will have to find one to replace it with. For the price it works.

2022 Polaris Sp ranger 570

I used mine on a 97 Tacoma. The fender well factory washer bottle had turned to ash and I was disinterested in spending over 100 bucks for a factory replacement. I mounted this to the factory cruise control cover plate and spliced the factory washer harness to the supplied connector. The pump sprays with enough pressure to cover the windshield. I used my factory washer nozzles, can’t speak for the ones supplied in the kit. Now the capacity of the bottle is small, about a quart, but that is more than you might think and certainly worth the trouble of popping the hood more often to top off the reservoir. Besides, you need to be checking your oil anyway… For the price of around 20 bucks, it’s worth it to me.

Have not installed it yet.

I was so impressed that I ordered a second one for my skid steer

It had all the parts I needed for the install. It went in easy and works well

Bottle not that big which is a plus for me because of space constraints. Description says to only use water but it does work with washer fluid. Not a lot of hose but I managed to make it work. Would have been nice if they included the small terminals for the switch.Giving it five stars because it functions well and gets the job done.

The windshield wiper was super easy to install and wipes the rain away like wiping a babies nose with a soft tissue.

This is a great kit. The only reason I dropped a star is because the spray angle is almost flat. Out should come with more than 1 nozzle size or be adjustable.

The pump from the tank work good and there is a good amount of spray. The nozzles are adjustable with a safety pin. The hardware that comes with this is lacking. I decided to mount this under passenger seat because there was very little space on the front of the Can Am. I had to purchase tubing to run from the pump to the nozzles. The mounting bracket isn’t the best. Also the wiring isn’t very long either, definitely not long enough if you mount the tank in the front of your vehicle. The button is a small red button. I look for instructions to use a push rocker but nothing is available.

The mounting for a glass windshield was going to be difficult.

I bought this for a 2015 Hyundai genesis coupe. I installed a cold air intake which unfortunately means I have to remove the original washer fluid reservoir. I happen to come across this product and looking at the original pump motor and the one included with this they looked very similar so I chose this one. When I got it out of the box, I was absolutely ecstatic that it turned out to be in the same one that Hyundai uses with just a slight difference in the plug. So I took the motor out of this one and put the original motor into the new tank and it worked flawlessly. The only thing I did to the tank was drill out a 1-3/8” hole with a hole saw at the bottom to install the level sensor. No leaks, no issues. Perfect. I’ll probably be buying another for other project cars in the future. Great buy.

Seems solid, works well in my ‘71 Ford F250 restoration project. Great value as long as it holds up under the desert heat.

Although this kit feels cheap, it gets the job done. Only thing to really determine is how long it lasts. *Important* these are fully adjustable direction wise. The metal nozzle heads can be rotated in all directions to dial in the spray. It is not adjustable as far as spray pattern.

Seems like a decent piece, I do suspect its low quality though. I hope longevity is there.

Everything needed was in the kit. Add electrically pumped washer tank to an old car, a side by side or??Worked great on a classic VW, replacing the old tank that worked off of spare tire air pressure.Super easy to install. Recommended to my little brother for his.

Easy to install great product works well the only thing is that it has a limited range for the blade to wipe

The stock tank on my Volvo 240 had some cracks and it holds a million gallons. This very small bottle gives me a lot of extra room in the engine compartment and so far the pump as worked great with the stock washers.

I didn't in stall this in a vehicle. Instead I am using if for a water feature with my model trains. This was the perfect kit, plenty of pressure and flow for the display!

I haven’t taken out in the rain yet. But in garage it’s been working fantastic. It was easy enough to put together no problems. I just put it together yesterday. The first big ride is Good Friday benefit . Looking forward, no matter the weather THANKS

overall not bad for the price. I replaced the wiper blade with a winter blade. The included blade severely scratched my utv acrylic windshield. Very flimsy (junk)

Like a wiper, this is a must when SXS riding in rough conditions. Didn’t use the squirters that came with it, found some adjustable ones at the auto parts store that worked better. But the small bottle mounts nicely under my seat.

Works great

After installing this unit it only worked one time. The unit is hard to put the washers and nut on the inside bolt. When trying to use the unit again the motor is froze up and would not even try to move the wiper. save your money and do not buy.

I have a heavily modified 2000 Cherokee and the original washer fluid bottle was removed because of the removal of the inner fenders and addition of Affordable Offroad armor with fenders. Someone before me did all this but never bothered to install another washer fluid bottle elsewhere as they built it to be trail rig. I use it as a daily driver so I immediately went looking for a way to install the factory one under the hood after I installed a cowl intake. Unfortunately a new one wasn't horribly expensive but you can't buy the fluid level sensor anymore and not installing it would leave a giant hole in the tank I would have to somehow seal off. So I started looking around for universal kits and came across this guy and decided to give it a go. It comes with everything needed to add a washer fluid system to basically anything which is nice but I only needed the bottle with the hanger, pump and the plug for the pump. I bought a piece of 2" wide flat steel from Menards, bent one end at a 90 degree and measured out the holes to mount it to the Jeep and mount the bottle to the steel. After drilling out the 4 holes I primed and painted with some color match paint from my WJ which happened to be a very close blue color and installed it under the hood. I crimped some spade connectors to the plug for the pump and cut off one side so it was just 1 prong sticking out of both and slid it into the factory plug. After making sure I had the correct plug for the front pump I wrapped all the connectors with electrical tape so if I ever came across a factory tank I could swap it out and still have the factory wiring good to go. The pump it came with is nice and strong and the only real downfall is how small the tank is, less than half a bottle of washer fluid fits in it. Bug season is going to suck having to constantly having to refill it.

The reservoir and pump works for the intended purpose with one caveat. The pump does not have a built in valve, so if the spray nozzles are ever close to the same relative height as the reservoir, water will begin to leak out of the nozzles. I installed it on a side by side, and I travel on inclines and declines a lot, so the reservoir ends up needing to be refilled quite often. I intend to install a solenoid valve inline that will open when power is provided to the pump.

This has a very short sweep. It didn’t work for my Pro R Polaris.

Well made, works great

The splines are easy striped when putting together

Very good, recommended it

Would have liked to have seen better wire and a better switch. You only get about a foot of wire and the switch is pretty cheesy. Went to my local parts store and got a better switch and 16g wire. It works great though!

Very nice for the price, simple to install. But the Red and Black wires that are already wired into the 2 prong plug are the opposite of how the instruction show the plug is supposed to be wired. Usually Red + ispositive and Black- is negative. Since I am not using the supplied switch, but am instead using the OE washerswitch this is important. I can make it work, but would like to know the correct polarity. I DID send the seller this question, but DID NOT receive a response. But to be clear, I do like the product.

It works once installed and adjusted. The video makes it look a little easier to install than it is. I had to tape a nut to a pair of plyers to hold it while I turned the hex bolt. The fingers would just not fit. I you have installed this type of thing before you will get it done. Once adjusted it covers the entire area in front of the driver. It you have a Coleman, Axis or other Hisun model, the wiper may extend above the major part of the windshield but it does not interfere with the function of the unit.

Very compact and easy to install

I used this on my 2005 Subaru Legacy GT as an intercooler sprayer to cool it down when it got hot. Works fine.

I bought this as a way to put off a proper repair of a leaking reservoir in a 2006 Yukon XL. If you know the gmc's and most vehicles the stock location is wedged between the battery and grill etc. Anyway I mounted this near the firewall and jumped the switched side of the relay for the original after disconnecting the oem pump. This unit does not put out enough volume to spray a good pattern. On the yukon the drivers side gets fed first and the passenger side is plumbed afterwards. That being said I am getting a good amount on the drivers side and nearly nothing on the passenger. Still better than using a spray bottle at red lights lol. Also if you need to run the rear sprayer you will need to get creative.This unit also does not have a check valve so it needs to be mounted lower than the nozzles not a real issue but worth noting if you were going to mount in a SXS or boat or something that might be a weird setup. Over all I am very happy with the result for the price and how easily I could return to the stock system when and if I am able to.

The kit seems to be decent quality for the money. The pump has good flow and pressure and seems like it'll last for a while. The only negative I can find is that the nozzles only have 2 little holes and just shoot over top of the windshield. I had to buy separate nozzles for more of a spray pattern. I also found the button included to be a little cheap feeling but I had already planned on using a different switch anyways.

My 96 Tacoma washer reservoir was broken and its not possible to buy a new one. This universal tank fit directly behind the front wheel well, passenger side. I mounted the bracket using a self tapping metal screw. I cut the wires to the original pump, used a DVM to find + and - and then used solderless connectors for the connection. The hoses I cut and fit using the provided inline connector. Works great -after 10+ years plus oi no washer I finally can clear the windows in the snow muck.

Installed this on our Can-Am plexy windshield. Works great. Small rocker switch turns it on and off

Didn't have the male plug to wire it up

The reservoir hangs off the mounting bracket like a paper clip, so old slow cars should be ok but no rock crawling or monster trucking with this.I wouldn't expect this to last many years, it seems typical Chinese low quality materials.

I installed a snorkel on my Jeep XJ and had to remove my factory washer bottle. This is a good alternative. Easily found a spot for it due to its size but, I run out of fluid alot due to its size. It's a trade off but overall a nice product, just keep a gallon of fluid in your vehicle and you'll be fine (top it off when you're checking you're oil every time you fill up your gas tank like your owners manual recommends, I know you don't and that's how you blow up your engine) tapped into the factory wiring harness for my old pump and it works well.

I bought this to install in my vintage car (mustang) It was easy to install and works like a champ. Had to buy a little more tubing at the big box store but it was cheap and didnt need but a couple feet, all the fittngs needed were included.

Installed this in our CanAm Maverick sport. The only issue is the spray nozzle it is not fanned and sprays a straight stream. Works great. I did change out the spray nozzle for a different brand

Wiper blade to large had to go to parts store to get a 14 blade.nomounting hardware

Purchased this for our 2020 Can Am x3 max. It was great when going through the muddy situations. When it installed only used one of the sprayers to get the whole windshield and it was mounted in the middle. The bottle was mounted under the shocks in the middle and did have to reverse the shocks to make it fit better.

We installed this on a 2000 Chevrolet Prizm because the windshield wiper motor gave out. Originally I came looking on Amazon for a motor but stumbled on this product and was sold on trying it because IT IS ABOUT THE SAME PRICE AS JUST A MOTOR! If you have an older car, maybe your reservoir is like ours and seriously cracked. Not only were we not able to fill it up all the way but the thought of attempting to pull it out to install a motor left us wondering if the whole thing would just break. So why not replace the whole thing and start fresh, right?! Especially with such a great price. You'll want to be a little handy (left this project to the husband and teenager) because dealing with wires isn't my thing or tweaking projects either but there is a great youtube video out there showing how to install this. So happy with this product!

It is a small tank so it can fit almost anywhere. But it is a small tank which will require many fill ups. It does not come with a connector for the switch which has very small terminals. It will require soldering some small gauge wire to them to keep them secured to the switch. If adding this as a completely new set up, I would suggest a relay for the pump and an inline fuse for the relay and switch. Using the existing wiring you wouldn't need to worry about it. Over all, good product and a good value.

Great kit but would like to have a much larger bottle for my RV. The bits in the kit are just fine to do the install for a smaller car but with a truck or RV you need a BIG bottle to hold a gallon of fluid so you are not stuck pulling off to refill during bad road conditions.

...and small wonder why. The second arrived in the thin, flimsy OEM shelf box with a shipping label stuck on it. No packing tape anywhere. Flap/lid would fall open if you turn the box upside down...along with the contents. Inexcusable shipping/package job. Otherwise, a quality replacement part. Comes with a multitude of mounting pieces and plumbing. All I needed to do to mount it in my 1997 Damon Daybreak (Chevy P30 chassis) was plug the wiper hoses and electrical connections on.

Purchased the complete unit for much less than replacing the failed pump would have cost. All concerns went away once the unit was installed and the pump provided better pressure and flow than the original unit ever did. New replacement nozzle sprayers were included but the hardware provide connected up to the ones originally installed. I should have ordered this replacement years ago when the original pump first started leaking long before it totally failed.

This was my solution to fill the house batteries on my motorhome. I replaced the caps with site monitor caps with a 1/4" fill nipple on each cell of the batteries. I hook a hose up to each cell, and hook up the distilled water reservoir to a battery and turn it on long enough to fill the cell. Beats doing it by hand. I don't have enough room in my compartment to fill them any other way.

Exact fit for 1996 Fleetwood Pace Arrow Vision on Ford F53 chassis. Even the Ford electrical plug fit and it almost fit the holder bracket but was too tight so used the one supplied with the kit instead. Filled with RainX, hit the washer button on turning signal and it sprayed the windshield just fine. As for sturdiness, gave five stars because it seemed as thick as the original but only time will tell.