Rear View Mirror 1.65-inch to 2-inch for Maverick X3, RZR, Pioneer, Talon and Kawasaki
In stock — availability reconfirmed before fulfillment
15-inch panoramic UTV rear-view mirror with a 4 mm aluminum-alloy housing, adjustable brackets and low-profile metal clamps for 1.65–2-inch round roll bars. Five mounting holes in the aluminum-alloy brackets and three adjustment methods…
Shipping weight: 3 lb.
15-inch panoramic UTV rear-view mirror with a 4 mm aluminum-alloy housing, adjustable brackets and low-profile metal clamps for 1.65–2-inch round roll bars.
Three adjustment methods
Five mounting holes in the aluminum-alloy brackets and three adjustment methods let you position the mirror horizontally and set the rear-view angle to suit your cage and seating position.
Heavy-duty aluminum-alloy housing
The 4 mm aluminum-alloy housing features weather-sealed caps and an anti-shock pad to help protect the mirror from vibration and impacts.
Low-profile metal clamps
Toothed clamps grip the roll bar securely. Their low-profile design accommodates many roof setups, but mounting and roof clearance must be checked on your vehicle.
Wide rearward view
The 15-inch center mirror provides a broad rearward view to help reduce blind spots.

Frequently Asked Questions
What is the spacing between the mounting points?
KEMIMOTO specifies 7.1 inches between the mirror mounts.
Is this a panoramic mirror or a flat mirror?
KEMIMOTO describes it as a panoramic mirror.
Are the clamps metal or plastic?
The clamps are made of metal.
Will it fit a 2006 Kawasaki Mule 3010, and can it change from convex to flat?
The supplier FAQ lists compatibility with the 2006 Kawasaki Mule 3010. Confirm the mounting dimensions and clearance on your cage. The mirror cannot be changed from a convex rear view to a flat rear view.
Specifications
- Color
- Black
- Included
- Rear-view mirror, clamps and mounting hardware
- Adjustment
- Three methods; five bracket mounting holes
- Mirror width
- 15 inches
- Mount spacing
- 7.1 inches between mirror mounts
- Clamp material
- Metal
- Housing material
- Aluminum alloy
- Housing thickness
- 4 mm
- Mounting tube diameter
- 1.65–2 inches, round tubing
Installation
Easy to install
The butterfly-clasp design makes the mirror easier to install and remove. Use the included clamps and mounting hardware on 1.65–2-inch round tubing, then adjust the brackets and mirror to obtain the required rearward view.
Vehicle fitment
Includes clamps and mounting hardware for 1.65–2-inch diameter round tubing. Check the tube diameter, available mounting space, roof clearance and viewing angle before installation. Model names alone do not establish compatibility with every year or cage configuration.
- Polaris RZR: supplier lists 2008–2023 models, including XP 1000, Turbo, 900, 800 and 570; its Pro XP / Pro R list states 2020–2023.
- Arctic Cat Wildcat X 1000: supplier lists 2013 and later; verify your specific cage setup.
- Honda Pioneer 1000: 1.75-inch tubing; Honda Talon: 2-inch tubing. Supplier does not specify model-year ranges.
- Kawasaki Teryx / Teryx 4: 1.875-inch perimeter tubing.
- Can-Am Maverick X3: 1.85-inch tubing; Maverick and Commander: 2-inch tubing. Supplier does not specify model-year ranges.
- Yamaha YXZ 1000: 1.75-inch tubing; Viking and Viking six-seater: 2-inch tubing.
- Kawasaki Mule 3010 (2006): listed as compatible in the supplier FAQ; confirm the round-tube mounting dimensions.
Warranty
This product is backed by a KEMIMOTO limited manufacturer warranty against defects in materials and workmanship from the original date of purchase. Coverage length can vary by product; contact our support team for this item's exact term.
What is not covered:
- Theft or loss of the product.
- Use for an unintended purpose.
- Misuse, accident or other abnormal use.
- Damage caused by self-disassembly or self-repair.
Warranty service and claims: Warranty claims are coordinated through Ranch & UTV Supply. Contact our support team with your order number, a brief description of the issue and clear photos or a short video of the defect. We work directly with KEMIMOTO on inspection, replacement parts or a unit exchange on your behalf.
Reviews (110)
No verified purchase reviews yet.
110 reviews
Bought this from us? Sign in to leave a verified review.
Very happy with this mirror.
They dont fit returning. These do not work for a 2026 commder as I was advised
Grate mirror but said it fits my 25 krx4 1000 es but doesn't clamps dont go small enough and doesn't fit with the kawasaki oem roof installed. Need to return it
Had a problem with the first rearview mirror, which had a stripped screw on the clamp. Contacted customer service and a whole new mirror and clamps were shipped quickly. Love the mirror and works well.
Amazing!!!
I mounted it in my 2025 cfmoto 800xl. I love the adjustability and the view it gives me.
Great mirror
Very easy install no vibration very good bye
The 2024 CanAm Maverick X-R with its air intake scoop coming down off the roof makes the stock mirror completely worthless. Rear visibility is zero. I purchased 2 of these mirrors and installed one on each side of the small stock mirror and now I have an excellent full field of rearview vision. Well worth the $80 with shipping I paid for two!
This mirror met the expectations 100%
It was easy to install, good for the price.
Very awesome product
This feels like a quality mirror, but will not fit a 2023 Can Am Commander 700xt, mirror brackets not wide enough to fit roll bar where roof mounts. Suppose you could mount it on drivers side, but that's not something I wanted.
Great product!
I bought this mirror to replace an expensive mirror that wouldn't clamp tight, and stay tight. I figured at this cheap price that I'd try it. I was shocked at the quality , it was built better than the other one, clamped in tight and doesn't move! It also greatly increased my rear view! This mirror far exceeded my expectations!
Excellent mirror. Wide view, easy install and quality materials. Actually using this on an air cooled dune buggy instead of my polaris and it’s exactly what I was looking for. Thanks!
I mounted the mirror in my Kawasaki Mule in about 5 minutes.
If your installing make sure to not put it directly in the center on a 2023 RZR XP 1000 since the curve is not substantial. Need to have it more towards the driver so you can see blind spots and a wider area more easier on the left hand side. It’s a great mirror but just make sure it’s not directly in the center.
Fit well and looks good
Easy to install on the roll cage, even with an existing roof. Mirror has a good field of vision to see both people in back seats, and behind the rzr.
Easy to install and works perfect! Thank you!
Purchase this for our side by side thats used on the farm. It still looks great and has great view. We have to often cross the road or drive on them and it works well to see and be safe.
Fácil de instalar
“19’ rzr 1000” Good looking mirror fits great, Only issue i have is with it mounted level, (from the driver seat) you can’t see behind you, looks at passanger and right rear. Had to twist clamps so i could see behind me. (In photos)
Simple to install, sturdy, give me a clear 120 deg of vision behind me. Does not shake, rattle, or move from selected positions, which is everything! Installed it on my 2022 CFMOTTO UFORCE 600.
these are very nice mirrors all aluminum construion made very well.the two clamps are great very strong should last a long time.these are good people to deal with highiy recommended
It’s a nice mirror, but unfortunately does NOT fit with the roof on my 2021 Polaris Turbo S.
Installed on my 2019 Kawasaki Mule. The mounting of the brackets was difficult due to the small wrench included in the box. Used a better wrench I had and things were easier. Mirror offers a good view and is sturdy.
Installed this on Polaris Ranger and it was great. The mirror tightens snug and has minimal vibrations when driving. Good mirror for cheaper than Polaris brand.
My 3 set finally found the one I like
Very Adjustable and can rotate so the the flip out windshield will clear. I did cut some small strips of thin rubber so the jaws would grip better. No Big Deal !
easy
El retrovisor es de calidad y no se mueve , pero para que funcione bien lo tienes que poner enfrente de ti para ver bien
Kemimoto makes good quality products and this mirror is no exception. Nice clamps good hardware etc
made well
I like the solid built clamps, mirror & overall quality of this. View is good for my needs.
Fits the rollbar on my Kubota RTV-X1140 SxS. Very easy installation. Less than 20 minutes. Super sturdy. No vibration. Easily adjustable for driver height. Great value!
Value for money and easy to install but would not fit on 2021 can-am maverick with roof on.
As described. god quality.
Exactly what I needed and actually glass! Worth the price paid unlike the first one I purchased.
ANOTHER'S HEAVY DUTY QUALITY PRODUCT FROM KEMIMOTO.
put it my tractor.works very well thanks rob h
Easy to install and much price than local dealership
I bought it for my son he loves it
good quality ,stable and easy to use.
Great product. Easy to install. Very sturdy and well made.
Unit fits my CF Moto UForce 800 well. It is adjustable (will move slightly if needed. This UTV is a work vehicle and does not receive many "bone jarring" jolts in the cabin. Overall, a well built item.
Looks good
Large field of vision, metal frame, excellent mounting hardwareBuy this one!!
Good quality and clear vision. Sturdy brackets. Only problem was my CanAm Maverick roof bracket did not allow me to Center mount it so I put it in front of me with a slight offset like a school bus mirror
This seems to be a super sturdy mirror, the two connecting points makes it perfect for my cage with the intrusion bars. The only complaint I have is that it's not curved. You can see a lot of the passenger side of the car but not much on the driver side unless you lean to your right but with harnesses on you will have limited movements. Had this been curved it would have been a 5 star no-brainer.
Dislike the mounts for the mirror. Too short. Otherwise, great!
Had a big oval rear view mirror but kept bumping my head on it if moving around in the cabin. Replaced it with this one and I’m much happier. Great range of view and I done bump my head. Go for it.
After installing this, which is quite easy and fine in a few mins, I decided to send back the side mirrors as this mirror has such a wide field of view, no need for side mirrors. Good quality and price is not bad. Fits perfect on polaris 570 full size with roof. I was impressed with this mirror and u really should have one to enhance your rear view in woods for animals, zombies, etx., and for better safety. Definitely recommend !
Great product
Easy to install
Excellent, work exactly like I expected. Easy to install when your hands and fingers are working
Easy to install and perfect for the price
Appears to be a sturdy mirror with a good field of view. Pay attention to the 1.65 diameter as a Yamaha is 1.50. I used a piece of rubber filler from another accessory and it tightened up nicely. Might be able to use double sided tape to fill gap.
Good quality mounting hardware. I mounted in center of front UTV roll bar. I need to move it to left side so I can see behind me. It’s not curved or Panoramic so can’t mount in middle. Still a good mirror.
Love the slim design of this mirror. Provides great field of vision behind us without obstructing front view. Easy to install!! 6 months with no issues!!I have recommended this to fellow Mule 4010 owners.
Installed on my tractor canopy. Very happy with the quality of this item.
Damaged on side, didn’t want to return.
Very nice good deal
Nice price easy install. Pretty sturdy should last a long time
Got this for our new Honda Pioneer. Very satisfied with the product and ease of installing it! Received it in 2 days also
Easy to install, great value highly recommended this product. I installed on a 2018 Kawasaki Teryx4. I highly recommend this company for all your utv accessories.
I didn’t realize my SXS came with a mirror so I didn’t install this mirror. But I almost broke a tooth trying to get this thing out of the packaging when it came because it was so tight in there. But it seemed like it was a pretty good mirror
this mirror worked so much better than the first one we got that broke. nice sturdy product. works great on our razor side by side
Nice product fast shipping had a problem with the first one sent out another and had it the next day.
Works great! And good price!!
Took longer then expected to arrive but well worth the wait. Well built and very sturdy. Fit my 2020 Kawasaki teryx with no issues. Very happy with my purchase!
This did not fit my can am commander 1000 that has a hard top, not enough room to fit the brackets between the cage and top. I like the product looks well made.
Installed easy on my Honda Talon, and it gives a great view of what’s behind you. No need for side mirrors now
This is a terrific mirror and gives great visibility. Initially, I installed it in the center where a car rearview is located but you actually want to install it directly in front of the driver. Otherwise, it was easy to install and adjust. Hightly recommend
I LOVE IT BUT ONE OF THE BRACKETT'S IS BROKEN BUT I HOPE THEY WILL REPLACE IT!
Recently bought a Honda Pioneer UTV. Wanted more visibility. This is an excellent rear view mirror
Seems to fit well, works as described
Always happy with what I get through Kemimoto.
Very good product. Fits on 2 inch roll bar but be careful to not over tighten. I broke the back bracket. I reached out to the company to see if I could buy the broken part and was surprised that they sent me a whole new mirror, no questions asked. Recommend.
Got this for my hyson fit perfect
worked on my can am commander. not as much adjustability as my previous mirror but this one is built better
As expected
Easy to install although I had to install it twice to get it positioned correctly. The mirror provides great rear viewing and seems to be secure on the cab roll cage of my Ranger.
ALL GOOD
Nice product Long way but worth it
I bought this mirror for my Kubota sidekick because it’s sure a lot easier to check the mirror when I’m driving or backing up than it is to constantly look over my shoulder.Very solid mirror and super easy to install
Nice mirror with a wide view
This was very easy to install with easy to follow instructions with the correct size Allen wrench included. Very sleek profile and style with the edges. Long length helps you see more when backing up. Does not move while bumping down the road but will move when you hand adjust. Very useful and I really like this mirror.
Have to put over the driver side to see in behind. You have to watch when you tighten the clamps down they will snap just tighten till the clamps stop moving dont torque them down but the customer service is awsome! They helped me resolve the issue
This is a good solid mirror that doesn't jiggle on the trail.Be careful not to over tighten the cap screws during installation. I stripped out the aluminum clamping device and had to get a slightly longer cap screw.
KemiMoto has built a very solid mirror! 👍 There are NO plastic parts. The frame and mounting brackets are metal and the unit utilizes real glass. Installation is a cinch. I did a video review of the mirror installation if you want to see more about it. Terrific upgrade on my UTV. https://youtu.be/xpcwX6W07mc
I’ve had this mirror in my x3 for a year and a half with 3,200 miles on it and I live it. It is by far the best mirror I’ve found on the market. I have 3 side by sides and have tried at least 10-15 mirrors and this is the one e have in all 3 units now!
I loved this mirror when it arrived. A week later I went to get in my RZR and the glass had fallen off the backing. Do not recommend!
Ordered this for my 2020 Pro Xp. Worked great even with my roof and my sound bar.
It’s a sturdy rear view mirror
It fit my vehicle well.
My rear view mirror was beginning to deteriorate and I was looking at replacing it when I ran across this option. I read a lot great reviews and decided to try it for myself. I love it! It just clips over the mirror and gives me a great view out the back as well as helping with blind spots. Very pleased.
My review on this is Awesome! Much better visibility and you don't have to worry about those blind spots behind you. Everybody loves my mirror. My aunts and uncles all wanted me to order one for their cars. HIGHLY RECOMMEND this product.
The clamp for the roll cage is metal and because of that you can really tighten it down. Once I got it in place and tightened, we took our machine on vacation. We did over 500 miles of four wheeling on rough rocky terrain. The type that rattles you all over the place. I never had to readjust the mirror. I was really impressed with how well it stayed in place, and the convex design gives you a great field of vision behind you. Definitely worth the money in my mind.
Perfect for the 2020 Honda Talon look great and clear very happy with it
Easy to install, perfect rear view mirror for a side by side
The clamp for the roll cage is metal and because of that you can really tighten it down. Once I got it in place and tightened, we took our machine on vacation. We did over 500 miles of four wheeling on rough rocky terrain. The type that rattles you all over the place. I never had to readjust the mirror. I was really impressed with how well it stayed in place, and the convex design gives you a great field of vision behind you. Definitely worth the money in my mind.
Great visibility
Mirror works great, needs to be offset on the new CanAm Maverick Trails’, as the front roof brackets are in the way if you purchase a roof.
Put this on my 2018 Honda pioneer 1000 and worked good .
Installed this in my UTV to replace one that would not stay in place.This one give great views and tightens down nicely, but you have to take them down evenly or it gets bound up. Just an all around great mirror.
Related products

Upgraded Rear View Mirror for Polaris Ranger 500, 570, 900 and 1000 Crew XP

Side Mirrors and Rear Mirror with 1.75-inch to 2-inch Roll Bar Cage

1.5-inch to 2-inch Rearview Mirror for RZR, Pioneer, Talon, X3, CFMOTO and Kawasaki
